 |
SN-DZF-6090 / 6210 / 6500
Scienovo
RT+10~250℃
1 Years
OEM /ODM Service
| Quantity: | |
|---|---|
Product Description |
Summary
The product is widely used in biochemistry, chemical and pharmaceutical, health care, agricultural research, environment protection and other areas of research and application for powder drying, baking and all kinds of glass containers’ disinfection and sterilization. Especially for those drying heat-sensitive, labile, oxidizing material and decompounded to carry on fast and effective drying process.
Advantages
Vacuum environment greatly lowered the liquid’s boiling point which needs to be driven away, therefore the vacuum dry method can be applied into heat sensitivity material.
For the samples which can't be dried easily, such as powder or other pellet form sample, using vacuum dry method may effectively reduce drying time.
Various complex structures of machinery ministry or other porous sample process use vacuum dry method after washing will not leave any residue.
Safety guarantee: whether under vacuum or inertia condition, the possibility of oxide explodes when is heated will completely be eliminated.
Compared with the normal drying method depended on air circulation, powder samples will not be blown or moved away by air
Features
Heating element is on the internal partition of the oven. Compared with traditional vacuum drying oven, it can cut down 50% heating time.
Several sets of data show in a big LCD screen. The operation interface can be easily understood and handling.
The aluminum shelf uses a special stamping process, oxidation will not occur in high temperature, and the conduction is fast. The heat loss will be reduced at the most extent.
The chamber is cuboid to maximize the volume. Microcomputer intelligent temperature controller makes temperature control accurate and reliable.
Reinforced, bullet-proof double-deck glass door to observe objects in the oven. Inert gas can be filled into it.
The tightness of the door can be adjusted by user optionally. Wholly shaped silicone rubber door seal ensures the high vacuum degree in chamber.
The working room uses stainless steel plate, good cold-roll shelf sheets cover, with anti-static plastic coating.
Storage, heating, experiments and drying are all doing in the environment with no oxygen or filled with inert gas, so oxidation will not happen.
Specification |
Model | SN-DZF-6090 | SN-DZF-6210 | SN-DZF-6500 |
Work Voltage | AC220V 50HZ | ||
Temperature Range | RT+10~250℃ | ||
Wave Degree Of Temperature | ±1℃ | ||
Temperature Resolution | 0.1℃ | ||
Vacuum Degree | ≤133Pa | ||
Input Power | 1400W | 2200W | 3500W |
Interior Dimension W×D×H(Mm) | 450×450×450 | 560X600X640 | 630X510X845 |
Overall Dimension W×D×H(Mm) | 615×660×1440 | 720X805X1680 | 790X1030X1853 |
Volumn | 90L | 210L | 500L |
Shelves Per Chamber (Standard Equipped) | Internal heating 2pcs Shelves | Internal heating 3pcs Shelves | Internal heating 4pcs Shelves |
Inner Material | Stainless steel | ||
Timing Range | 1-9999min | ||
Note | With Vacuum Pump | ||
Product Description |
Summary
The product is widely used in biochemistry, chemical and pharmaceutical, health care, agricultural research, environment protection and other areas of research and application for powder drying, baking and all kinds of glass containers’ disinfection and sterilization. Especially for those drying heat-sensitive, labile, oxidizing material and decompounded to carry on fast and effective drying process.
Advantages
Vacuum environment greatly lowered the liquid’s boiling point which needs to be driven away, therefore the vacuum dry method can be applied into heat sensitivity material.
For the samples which can't be dried easily, such as powder or other pellet form sample, using vacuum dry method may effectively reduce drying time.
Various complex structures of machinery ministry or other porous sample process use vacuum dry method after washing will not leave any residue.
Safety guarantee: whether under vacuum or inertia condition, the possibility of oxide explodes when is heated will completely be eliminated.
Compared with the normal drying method depended on air circulation, powder samples will not be blown or moved away by air
Features
Heating element is on the internal partition of the oven. Compared with traditional vacuum drying oven, it can cut down 50% heating time.
Several sets of data show in a big LCD screen. The operation interface can be easily understood and handling.
The aluminum shelf uses a special stamping process, oxidation will not occur in high temperature, and the conduction is fast. The heat loss will be reduced at the most extent.
The chamber is cuboid to maximize the volume. Microcomputer intelligent temperature controller makes temperature control accurate and reliable.
Reinforced, bullet-proof double-deck glass door to observe objects in the oven. Inert gas can be filled into it.
The tightness of the door can be adjusted by user optionally. Wholly shaped silicone rubber door seal ensures the high vacuum degree in chamber.
The working room uses stainless steel plate, good cold-roll shelf sheets cover, with anti-static plastic coating.
Storage, heating, experiments and drying are all doing in the environment with no oxygen or filled with inert gas, so oxidation will not happen.
Specification |
Model | SN-DZF-6090 | SN-DZF-6210 | SN-DZF-6500 |
Work Voltage | AC220V 50HZ | ||
Temperature Range | RT+10~250℃ | ||
Wave Degree Of Temperature | ±1℃ | ||
Temperature Resolution | 0.1℃ | ||
Vacuum Degree | ≤133Pa | ||
Input Power | 1400W | 2200W | 3500W |
Interior Dimension W×D×H(Mm) | 450×450×450 | 560X600X640 | 630X510X845 |
Overall Dimension W×D×H(Mm) | 615×660×1440 | 720X805X1680 | 790X1030X1853 |
Volumn | 90L | 210L | 500L |
Shelves Per Chamber (Standard Equipped) | Internal heating 2pcs Shelves | Internal heating 3pcs Shelves | Internal heating 4pcs Shelves |
Inner Material | Stainless steel | ||
Timing Range | 1-9999min | ||
Note | With Vacuum Pump | ||
